Honda 08B06-SDA-100 Installation Instructions Manual page 4

4. Remove the dashboard center holder:
• Open the coin pocket lid and remove the coin
pocket.
• Remove the two self-tapping screws.
• Gently pull out on the dashboard center holder
to release the two retaining clips, unplug the
vehicle connector, and remove the center
holder.
COIN
POCKET
SELF-TAPPING
SCREW
(Reuse.)
CLIPS (2)
With Ashtray
• Open the lid and remove the ashtray.
• Remove the two-self-tapping screws.
• Gently pull out on the two retaining clips,
unplug the cigarette lighter harness connector,
vehicle connector, illumination bulb, and
remove the center holder.
DASHBOARD
CENTER
HOLDER
ASHTRAY
SELF-TAPPING
SCREW (Reuse.)
RETAINING
CLIPS (2)
4 of 9
LID
DASHBOARD
CENTER HOLDER
VEHICLE
CONNECTOR
2206061K
ILLUMINATION
BULB
CIGARETTE
LIGHTER
HARNESS
CONNECTOR
VEHICLE
CONNECTOR
2730010K
AII 24379 (0208)
5. Remove the pocket:
• Apply masking tape to the edge of the center
panel.
• Remove the two self-tapping screws.
• Push in on the bottom of the pocket, then pull
out on the top by inserting the end of a hook
tool between the pocket and center panel, and
pull it out toward you to release the two
retaining clips.
HOOK TOOL
RETAINING
CLIPS (2)
POCKET
SELF-TAPPING
SCREW (Reuse.)
6. Remove the right and left inner covers (one hook
and one clip for each cover).
CLIP
LEFT INNER
COVER
HOOK
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
CENTER
PANEL
MASKING
TAPE
LID
Push
2206073K
RIGHT INNER
COVER
POCKET
OPENING
2226010K