Installing The Player - Honda 08B06-SDA-100 Installation Instructions Manual

Installing the Player

7. Remove the vehicle harness clip from the vehicle
frame, and move it out of the way.
PLAYER BASE-
BRACKET
6 mm
FLANGE
NUT
VEHICLE HARNESS CLIP
(Insert into the hole of the
player base-bracket.)
8. Insert the studs from the player base-bracket into
the holes in the vehicle frame from the back, then
install the two 6 mm flange nuts while holding the
bracket firmly against the vehicle frame. Insert the
harness clip (removed in step 7) into the hole in
the player base-bracket.
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
VEHICLE
VEHICLE
FRAME
HARNESS
CLIP
(Remove.)
VEHICLE
FRAME
6 mm
FLANGE
NUT
2306011T
AII 24379 (0208)
9. Insert the studs of the left and right player sub-
brackets into the holes in the vehicle frame, then
install one 6 mm flange nut on the end of each
stud while pushing each sub bracket upward.
VEHICLE
FRAME
LEFT PLAYER
SUBBRACKET
10. If you are installing an in-dash CD player, remove
the shipping bracket.
SHIPPING
BRACKET
IN-DASH
CD PLAYER
6 mm FLANGE NUT
VEHICLE
FRAME
RIGHT PLAYER
SUBBRACKET 2306021T
2506020T
5 of 9