Table 2. Twisted Pair Cable Requirements For The 10Base-T And 100Base-Tx Ports At 10 Or 100Mbps - Allied Telesis AT-x230-10GP Installation Manual

Chapter 1: Overview
T 2. T
ABLE WISTED PAIR CABLE REQUIREMENTS FOR THE
100M
OR BPS
Cable type
Cat 3: Standard TIA/EIA 568-B-
compliant Category 3 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 16 MHz
Cat 5: Standard TIA/EIA 568-A-
compliant Category 5 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz
Cat 5e: Standard TIA/EIA 568-
B-compliant Enhanced
Category 5 (Cat 5e) shielded or
unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz
Cat 6 or 6a: Standard TIA/EIA
568-B-compliant Category 6 or
6a shielded cabling
18
10BASE-T
10Mbps
Non
PoE PoE+
PoE
Yes Yes
Yes Yes
Yes Yes
Yes Yes
100BASE-TX
AND
100Mbps
Non
PoE
No Yes
No Yes
Yes Yes
Yes Yes
10
PORTS AT
PoE PoE+
Yes No
Yes No
Yes Yes
Yes Yes