BKI LGF-F Service Manual page 25

Gas Pressure Fryer
STEP ACTION
13 Repeat steps 5-12 when
programming stages 2, 3, 4
and 5 for Electric and Gas
appliance types.
Repeat steps 5-10 when
programming stages 2, 3, 4
and 5 for an ALF appliance
type.
14 Press ENTER.
15 Press TOGGLE/CLEAR and
input the prealarm minutes.
16 Press ENTER.
17 Press TOGGLE/CLEAR and
input the number of fry cycles
you want to complete before
enabling filter lockout.
18 Press ENTER.
19 If you wish to input more
programs, proceed by pressing
the next program number and
follow steps 5 through 18 or
press PROG to exit the
programming mode.
DISPLAY
PROGRAM PREALARM
00:00
PROGRAM PREALARM
XX:XX
PROGRAM FILTER
PROGRAM FILTER
PROGRAM PRODUCT
23
COMMENTS
The time and temperature of
each stage has to be less than
the preceding stage.
This command allows you to
specify the number of minutes
before the end of the cooking
time (for each stage) until the
alarm sound The prealarm
value displayed may be a
previously programmed value.
XX:XX refers to the prealarm
minutes you input.
This command allows you to
0 specify the number of fry
cycles you want to complete
for this program before a
message is displayed
reminding you to filter the
shortening (filter lockout). The
filter value displayed may be a
previously programmed value.
X refers to the number of
X program cycles you want to
complete before filtering the
shortening.
#
Operation