BKI LGF-F Service Manual page 24

Gas Pressure Fryer
STEP ACTION
1 Press the FILTER/OFF/FRY
switch to FRY.
2 Press PROG on the keypad.
3 Input 1724 and press ENTER.
4 Select the program product
number (1-8).
5 Press ENTER.
6 Press TOGGLE/CLEAR and
input the number of minutes
you want to cook.
7 Press ENTER.
8 Press TOGGLE/CLEAR and
input the cooking temperature
for product to be cooked.
9 Press ENTER.
10 Press TOGGLE/CLEAR until
the desired option is displayed.
11 Press ENTER.
12 Press TOGGLE/CLEAR until
the desired option is displayed.
Table 2. Product Programming Procedure
DISPLAY
PROGRAM CODE
PROGRAM PRODUCT
PROGRAM PRODUCT
PROGRAM TIME1
PROGRAM TIME1
PROGRAM TEMP1
PROGRAM TEMP1
PROGRAM VALVE1
PROGRAM VALVE1
22
LOW
#
X refers to the program
X number you selected.
This command allows you to
00:00 specify the cooking time for
this stage. The time displayed
may be a previously
programmed value.
XX:XX refers to the number of
XX:XX minutes you input.
This command allows you to
000 °F
specify the cooking
temperature for this stage. The
temperature displayed may be
a previously programmed
temperature. The temperature
scale may also display °C
depending on the system
option that is set.
XXX refers to the cooking
XXX °F
temperature you input.
PROGRAM This command enables you to
TEMPCOM1 select whether or not time is
FLEX TIME allowed for the fryer to recover
from temperature loss while
cooking during this stage. The
FLEX TIME option will allow
the fryer to recover from
temperature loss.
PROGRAM X refers to the temperature
TEMPCOM1 compensation option selected.
X
This command allows you to
CLOSED specify whether the solenoid
valve will be open or closed
during this stage.
X refers to the solenoid valve
X option selected. OPEN is used
for Models ALF and BLF
Automatic Lift fryers. If your
program requires the solenoid
valve to be closed while
cooking, choose the CLOSED
option.
Operation
COMMENTS