Control Panel And Features - Whirlpool MVWC400XW Technical Education

CONTROL PANEL AND FEATURES

ECO MONITOR
Your washer is specially designed to con-
serve energy and water. Each cycle, along
with any selected options, will result in differ-
ent energy and water usage. As you make
your cycle and temperature selections, the
Eco Monitor shows how well you are saving
energy and water.
WASH CYCLE KNOB
Use the Wash Cycle Knob to select available
cycles on your washer. Turn the knob to se-
lect a cycle for your laundry load. See "Cycle
Guide" for detailed descriptions of cycles.
CYCLE OPTIONS
When you select a cycle, its default settings
will light up.
TEMP
Temperature Control senses and main
tains uniform water temperatures by
regulating incoming hot and cold water.
Select a wash temperature based
on the type of fabric and soils being
washed. For best results and following
the garment label instructions, use the
warmest wash water safe for your fabric.
• Warm and hot water will be cooler than what
your previous washer provided.
• Even in Cool wash, some warm water may
be added to the washer to maintain a
minimum temperature.
SOIL LEVEL
Soil level (wash time) is preset for each wash
cycle. As you press Soil Level, the cycle time
(minutes) will increase or decrease in the
Estimated Time Remaining display and a dif-
ferent wash time will appear.
For most loads, use the soil level that is
preset with the cycle you have chosen. For
heavily soiled and sturdy fabrics, press Soil
Level to select more wash time, if needed.
For lightly soiled and delicate fabrics, press
Soil Level to select less wash time, if need-
ed. Lower soil level setting will help reduce
tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin
speed based on the cycle selected. The
preset speeds can be changed. Not all spin
speeds are available with all cycles.
• Faster spin speeds mean shorter dry
times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrin
kling, but will leave your load more
damp.
You may also add or remove options for
each cycle.
Note: that not all options can be used
with all cycles, and some are preset to
work with certain cycles.
3-5