Removing The Gearcase - Whirlpool MVWC400XW Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the impeller. See the section
"REMOVING THE IMPELLER AND
BASKET".
4. Remove impeller bolt.
5. Remove the basket. See the section
"REMOVING THE IMPELLER AND
BASKET".
6. Use cardboard or padding to lay washer
on the front cabinet.
7. Disconnect hoses.

REMOVING THE GEARCASE

8. Remove the belt. See the section: "RE
MOVING THE DRIVE BELT AND
MOTOR".
9. Remove the motor. See the section:
"REMOVING THE DRIVE BELT AND
MOTOR".
10. Remove the splutch assembly. See the
section: "REMOVING THE SPLUTCH".
11. Remove the shifter. See the section:
"REMOVING THE SHIFTER".
12. Remove the capacitor.
13. Remove the drain pump. See the
section: "REMOVING THE DRAIN
PUMP".
14. Remove the four (4) mounting bolts.
15. Pull the gearcase out of the tub.
4-15