Control Panel And Features - Whirlpool 4GNTW4400 Use And Care Manual

CONTROL PANEL AND FEATURES
EXTRA
SMALL =
REGULAR
CASUAL
EXTRA FABRIC
MEDIUM COOL WARM RINSE SOFTENER
DELICATE
.... _ ...... _ s_BR_CRE×,_2_._, HEAVY DUTY
EXTRA
LARGE
t>
LOAD SIZE TEt_PERATORE RINSE START
CYCLE STATUS 0
_LL WASH _NS_ _,NA_ CYCLE
L,_
CANCELHoLD_sEc
Not all features and options are available on all models.
Appearance may vary.
O
LOAD SiZE O
Select the setting most suitable for your load. Extra Small
will add a low amount of water for smaller loads and Extra
Large will add the most amount of water for large or bulky
loads. Items need to move freely. Tightly packing can lead to
poor cleaning performance, and may increase wrinkling and
tangling.
TEMPERATURE
Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water will be cooler than what your
previous washer provided.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
RINSE OPTIONS (on some models}
The following options may be added to most cycles.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
FABRIC SOFTENER with EXTRA RINSE
This option turns on both the Fabric Softener and the
Extra Rinse options.
O
WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE/UNLOCK LID BUTTON
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: if the washer is spinning, it may take several minutes
to unlock the lid. Press and hold for 3 seconds to cancel a
cycle.
CYCLE STATUS LIGHTS iNDiCATOR
O OOO _O
FILL WASH RINSE FINAL CYCLE LID
SPIN COMPLETE LOCHED
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
SENSING/FILL
C:3OOO_
FILL WASH RINSE FENAL CYCLE LID
SPIN COMPLETE LOCKED
When the START/Pause/Unlock button is pressed, the
washer will fill to the selected water level. If the lid is
closed when the machine is done filling, the lid will lock
and the machine will begin operation.
If the lid is open when the water stops entering the
machine, the cycle will not begin until the lid has been
closed and the START/Pause/Unlock button is pressed.
If the cycle has not been started within 10 minutes of
the water filling the washer, the washer will pump out the
water.
NOTE: Avoid opening lid during sensing phase. The
sensing process will start over when the washer is
restarted. The sensing light may also come on during the
Soak and Wash portions of the cycle. This is normal. To
restart the washer after the lid has been opened, press
Start.
4