Select Cycle - Whirlpool MVWC400XW Technical Education

USING LAUNDRY PRODUCT DISPENSERS (continued)
7.

Select cycle

Turn cycle knob to choose your wash
cycle. When knob is lined up with a
cycle, you will hear a clicking sound.
Indicator for Estimated Time Remaining
will light up with a cycle time. For more
information, see "Control Panel".
If you do not want to begin a cycle
immediately, you may choose DELAY
WASH option.
To change delay time:
1. Press START/PAUSE.
2. Press DELAY WASH button
to select desired start time.
3. Press START/PAUSE.
To cancel delaying a cycle:
Press START/PAUSE again to begin a wash cycle immediately.
IMPORTANT: When delaying a cycle. use liquid HE detergent
only in the detergent dispenser tray. Powdered detergents may
absorb moisture from a previous cycle and clump before the
wash cycle begins.
8.
Select cycle settings
Once you select a cycle, the default settings for that cycle
will be lit. Press the cycle settings buttons to change the
Temperature, Soil Level, and Spin Speed, if desired.
Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist in
soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Tap Cold
This is the temperature from your
faucet.
3-11
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils