Whirlpool MVWC400XW Technical Education page 36

First try the solutions suggested here or visit our website at www.whirlpool.com/help
If you experience
Washer not performing as expected (cont.)
Clogged dispensers or laundry
Incorrect dispenser
products dispensing too soon.
operation
Button sounds are turned off.
No sound when
buttons are pressed
TROUBLESHOOTING (continued)
for assistance and to possibly avoid a service call.
Possible Causes
Always select Fabric Softener option to assure proper dispensing.
Load dispensers before starting a cycle.
It is normal for small amounts of water to be remain in dispenser.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
Use only liquid chlorine bleach in the bleach dispenser.
Button sounds can be turned on or off by pressing and holding
Cycle Signal for 5 seconds.
3-19
Solution