Table of Contents
Advertisement
RAID 1 Rebuild
When operating in RAID1 mode, if one of the hard drives fails or is
removed, the duplicator dock will enter a failed state and a buzzer will
sound once per second.
Use the <up> and <down> arrows to display information on either
Drive1 (Source) or Drive2 (Destination).
Reconnect a hard drive to the appropriate Source of Destination side
and the duplicator dock will automatically prompt for a rebuild.
The progress of the rebuild will be displayed, including the transfer
speed, percentage complete and a countdown timer to completion.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the UNIDUPDOCK and is the answer not in the manual?
Questions and answers