Advertisement
6.7 ,QSXW 3KLORVRSK\ 'LVSOD\V
'LVSOD\ RI SURJUDP SURJUDP VHTXHQFH VWDUW WLPH SUHVHW DQG LQIRUPDWLRQ
l
w
All displays are executed as LEDs and available depending upon the model.
w
They are subdivided into 4 different types:
1. Program selection and option displays
2. Program flow displays
3. Start time preset LED's
4. Information displays
w
3URJUDP VHOHFWLRQ DQG RSWLRQ GLVSOD\V
©
Over or next to a program or option key, there is always a corresponding LED
for acknowledging the selected function (not applicable for start time preset).
©
They are continuously lit during the whole program flow.
3URJUDP IORZ GLVSOD\ 3$$
w
©
The program flow display contains of a maximum of 3 LED's
©
The position of the LED's depends upon the model programming.
With vertical key arrangement, output is by the LED's LD6 to LD11, LD13 and LD14,
with horizontal key arrangement there is additionally LED LD12.
©
At present, PAA is assigned to the LED's LD9 through LD11.
©
According to the program start, the associated LED will be lit permanently during the entire program flow.
/(' IORZ GLVSOD\ IRU SUHVHW VWDUW WLPH
w
©
LED display for start time preset contains of a maximum of 3 LED's
©
The position of the LED's depends upon the model programming.
With vertical key arrangement, output is by the LED's LD6 through LD8 and LD9 through LD11,
with horizontal key arrangement there are additionally LED's LD12 through LD14.
©
At present, start time preset is assigned to the LED's LD6 through LD8 and is defined as follows:
LD6 = 9h / LD7 = 6h / LD8 = 3h
©
According to the time processed, the associated LED will be lit permanently until program start.
,QIRUPDWLRQ GLVSOD\V
w
©
These LED's are permanently lit from switching the machine on by use of ON/OFF key until
the moment of actual program start. These LED's will also be lit after reaching program stop until the
machine is switched off.
©
The display LED's will go dark during the entire program flow!
/(' GLVSOD\ 6DOW
w
©
The position of the LED depends upon the model programming.
It can be assigned to any LED not occupied with a program or option key.
©
At present, the LED Salt is assigned to the LED's LD13 or LD14.
©
"ON" when salt is lacking
©
Goes dark after filling up the salt (depending upon the dissolution of the salt, it may take some time
until the LED goes dark).
I Note:
w
/(' GLVSOD\ 5LQVLQJ DJHQW
©
The position of the LED depends upon the model programming.
It can be assigned to any LED not occupied with a program or option key.
©
At present, the LED Rinsing agent is assigned to the LED's LD13 or LD14.
©
"ON" when rinsing agent is lacking
©
Goes dark after filling up the rinsing agent
I Note:
LED display Salt goes dark when hardness range "WH1" is set
(no regeneration required)
Rinsing agent display can be totally switched off by the customer, depending upon the model.
(see description page B9)
Advertisement
