Electrolux EDW 1001 Service Manual page 24

6.5 ,QSXW 3KLORVRSK\ )URP SURJUDP VWDUW WR SURJUDP
VWRS
3URJUDP VWDUW
w
When the preset start time runs out, or 6 seconds after the last pushbutton operation of
a program or option key, the rinsing program selected is started automatically.
w
From this moment it is no longer possible to add a preset start time or any program option.
It would be necessary to completely restart the machine to enter a new preset start time!
SURJUDP IORZ
w
During program processing, the following LED's are on display
©
Key LED of the rinsing program and any options selected
©
According to the state of the program, one of the PAA LED's
w
The sequence of the program is separately described in the chapter Program Technology
3URJUDP VWRS
w
The end of the program is displayed with the PAA LED "End".
w
The acknowledgment LED of the program key, and of the option key of the completed program, if any,
remain lit.
w
After reaching program stop, the stored and executed program
can be cleared either by opening the door, or by switching the machine off
by use of the ON/OFF key S0.
w
If you clear the program by opening the door, the machine will be automatically
in "prestart" mode after closing the door, i.e. a new program could be selected immediately.