Advertisement
Step 6.
Refer to Figure 4. Select the following parts for assembly:
1. Lid Stacks (2)
2. Stack Vent Spacers (2)
3. Stack Vent Control (2)
H
Select The Stack Vent control and attach it to the lid using the phillips
head bolt and lock nut supplied in the seperate plastic bag.
H
Tighten nut then back of 1/4 turn to allow the Stack Vent Control arm to
move freely.
H
Select the Stack Vent Spacer and position it over the Stack Vent Control.
The opening in the spacer should point twoard the outside edge of the
grill lid.
H
Select the Lid Stack and attach it to the grill lid using four #10 - 24 x 3/8"
phillips head bolts, lockwashers and nuts. The Stack Vent Spacer should
be sandwiched between the Stack and the grill lid to allow the Stack
Vent Control to rotate freely.
STACK VENT
CONTROL
STACK VENT
SPACER
Step 7.
Refer to Figure 4. Select the following parts for assembly:
1. Charcoal Tray
2. Cooking Grid
H
Insert the Charcoal Tray into the tray/grid tower.
H
Insert the Cooking Grid into the tray/grid tower.
Special Features:
• Fully adjustable Charcoal Tray and Cooking Grid height.
• Access panel throught the cooking grid to the charcoal. No need to
completely remove a hot cooking grid with food to make minor coal
adjustments.
• Fully adjustable four vent system designed for maximum heat control.
FIGURE 4
C-6
Advertisement
