Advertisement
Step 4.
Refer to Figure 3. Select the following parts for assembly:
1. Grill bottom and top assembly
2. (4) Shelf brackets
3. (2) Shelf
H
Select the base assembly from the previous step. Make sure it is on a level
surface. Make sure it will not roll or slide.
H
With help from a friend, gently lift and center the grill body assembly on top
of the base assembly and secure with four 1/4 - 20 x 5/8" bolts and lock
washers. Tighten completely. You may choose if you want the wheels to the
left or the wheels to the right, the bolt holes will line up either way.
H
Attach the (4) shelf brackets using eight 1/4 - 20 x 5/8" bolts and lock wash-
ers. Make sure that the top flange of the brackets face each other. Correct
alignment will allow the shelf bracket holes to line up. Tighten completely.
H
Select the 2 shelves and secure to the shelf brackets with the #10 - 24 x 1"
carriage bolts, lock washers and hex nuts.Tighten firmly, do not overtighten
or the plastic shelves may crack.
C-5
SHELF
BRACKETS
Step 5.
Refer to Figure 3. Select the following parts for assembly:
H
Select the handle bracket and attach it to the grill lid as shown with two
1/4 - 20 x 5/8" bolts and lock washers. Tighten completely.
H
Now place the spring handle onto the studs of handle bracket by
compressing it and sliding it into place.
SHELF
GRILL BOTTOM
AND TOP
ASSEMBLY
FIGURE 3
1. Grill Handle Bracket
2. Spring Handle
Advertisement
