Rear Panel; Control Chassis - JEFF ROWLAND CRITERION Operational Manual

REAR PANEL

CONTROL CHASSIS

1. NiMH RECHARGEABLE D-CELL BATTERY COMPARTMENTS. Contains six (6) industrial
high current (9000mA) Nickel Metal Hydride (NiMH) rechargeable batteries accessible by
rotating each cap one quarter turn counter-clockwise.
2. INTEGRATED AC INLET, FUSE COMPARTMENT, AND AC MAINS POWER SWITCH AND
FILTER. Capable of accepting a wide range of input voltages (85-265VAC). Fuse accessed
by carefully prying fuse holder (identified by the fuse symbol) away from receptacle.
3. CONTROL CHASSIS SERIAL NUMBER. The Control Chassis serial number begins with the
letters "PC".
4. DC OUT R/L POWER OUTPUT RECEPTACLES. Receptacles send DC power and serial
communications data via two supplied DC power cables, one for each channel, to the Control
Chassis.
5. REMOTE SENSOR INPUT CONNECTOR. The remote sensor unit connects to this
connector via a 2-meter flexible cable. The wired connection allows full control of the
preamplifier through the infrared handheld remote transmitter. The 2-meter cable end marked
must be connected here to the preamplifier Control Chassis.
PREAMP END
6. USB DATA PORT. Receives USB serial data from external controllers which can be used to
perform most preamplifier operational functions.
Figure 3: Control Chassis Rear Panel
17