Rear Panel Connections - JEFF ROWLAND 925 Operational Manual

REAR PANEL CONNECTIONS

1. INPUT: Unbalanced RCA.
2. INPUT SELECT SWITCH: Switch between unbalanced RCA inputs and balanced XLR inputs.
PHASE: Use positive pin position to determine phase for each right and left channel.
3.
WARNING: POWER OFF UNIT BEFORE SWITCHING PHASE.
GAIN SWITCH: Switch between gain of 26 dB and 32 dB.
4.
5. INPUT: Balanced XLR.
LOUDSPEAKER OUTPUTS: Unscrew the knob that secures the speaker output connectors on
6.
SPEAKER OUTPUT A
both the
enough to allow access to the binding posts. Install the positive (usually red) loudspeaker cable
spade terminal to the positive (+) binding post and the negative (usually black) spade terminal to
SPEAKER OUTPUT B
and the
MODEL 925 MONO AMPLIFIER MANUAL
Figure 2: Rear panel and interconnects
and pull the securing block out far

REVA3

PAGE 11