Rear Panel Connections - JEFF ROWLAND 525 Operational Manual

REAR PANEL CONNECTIONS

Left Channel
1. INPUT.
Right Channel
2. INPUT.
Load (BTL) input. See
instructions.
3. LOUDSPEAKER OUTPUT A. Negative terminal.
4. LOUDSPEAKER OUTPUT A. Positive terminal. Use with
terminal for Bridge-Tied Load (BTL). See
detailed instructions.
5. LOUDSPEAKER OUTPUT B. Positive terminal. Use with LOUDSPEAKER OUTPUT A. Positive
terminal for Bridge-Tied Load BTL). See
detailed instructions.
6. LOUDSPEAKER OUTPUT B. Negative terminal.
7. REMOTE ON/OFF. A 1/8" (3.5 mm) mini-plug connector is provided on the rear panel of the
for remotely switching the ampli er between Operational and Standby modes. When
525
connected to another component with the proper circuitry, the ampli er standby function can be
turned and remotely.
ON OFF
8. AC MAINS INPUT CONNECTOR. Install the AC Power Cable into the AC input connector between
the ampli er and your AC mains outlet.
Balanced XLR.
Balanced XLR. Use Right Channel Balanced XLR input for Mono Bridge-Tied
CONNECTING TO LOUDSPEAKERS: BRIDGE MODE
CONNECTING TO LOUDSPEAKERS: BRIDGE MODE
CONNECTING TO LOUDSPEAKERS: BRIDGE MODE
Figure 2: Rear Panel Connections
for detailed
LOUDSPEAKER OUTPUT B.
MODEL 525 STEREO AMPLIFIER
Positive
for
for
MODEL

PAGE 11