Rear Panel - JEFF ROWLAND CORUS STEREO PREAMPLIFIER Operational Manual

REAR PANEL

1. DC IN R/L POWER INPUT RECEPTACLES. Two separate DC power cables, one for each
channel, are utilized to connect the power supply to
2. INPUTS. Four (4) pair Balanced (XLR), Two (2) pair Unbalanced (RCA) input jacks for each
channel.
3. MAIN 1/MAIN 2 OUTPUTS. Two (2) pair Balanced (XLR), Two (2) pair Unbalanced (RCA)
jacks for Main A/Main B outputs for each channel. (
and
OUTPUT A OUTPUT B
4. RECORD OUTPUTS. One (1) pair Balanced (XLR), One (1) pair Unbalanced (RCA) jacks for
Record Out.
5. REMOTE SENSOR INPUT CONNECTOR and SERIAL NUMBER. he remote sensor unit
connects to this connector via a 2-meter flexible cable. The wired connection allows full
control of the preamplifier through the infrared handheld remote transmitter. The 2-meter
cable end marked
PREAMP END
preamplifier chassis serial number begins with the letters "PD".
on the preamplifier back panel)
must be connected to the preamplifier rear panel. The
Figure 4: Rear Panel
CORUS PREAMPLIFIER
and are mapped to
MAIN 1 MAIN 2
.
16