Rear Panel Connections - JEFF ROWLAND 125 Operational Manual

REAR PANEL CONNECTIONS

1. LOUDSPEAKER OUTPUT.
2. LOUDSPEAKER OUTPUT.
Right Channel
3. INPUT.
BRIDGE MODE SWITCH. Move to the left for STEREO MODE and to the right for BRIDGE MODE.
4.
Left Channel
5. INPUT.
6. REMOTE ON/OFF. A 1/8" (3.5 mm) mini-plug connector is provided on the rear panel of the
for remotely switching the ampli er between Operational and Standby modes. When
125
connected to another component with the proper circuitry, the ampli er standby function can be
turned and remotely.
ON OFF
7. AC MAINS INPUT CONNECTOR. Install the AC Power Cable into the AC input connector between
the ampli er and your AC mains outlet.
Right Channel.
Left Channel.
Balanced XLR.
Balanced XLR.
REVA2
Figure 2: Rear Panel Connections

MODEL 125 STEREO AMPLIFIER
MODEL

PAGE 10