Rear Panel - JEFF ROWLAND 625 Operational Manual

REAR PANEL

1. AC MAINS INPUT CONNECTOR. Install the AC Power Cable into the AC input connector between
the ampli er and your AC mains outlet..
2. INPUTS. Two (2) pair Balanced (XLR).
LOUDSPEAKER OUTPUTS. Unscrew the knob that secures the speaker output connectors on both
3.
the
L SPEAKER OUTPUT
allow access to the binding posts. Install the positive (usually red) loudspeaker cable spade terminal
to the positive (+) binding post and the negative (usually black) spade terminal to the negative (–)
binding post of either horizontally or vertically oriented
loudspeaker connections by tightening the knob securely with your ngers.
4. REMOTE ON/OFF. A 1/8" (3.5 mm) mini-plug connector is provided on the rear panel of the
625 STEREO AMPLIFIER
modes. When connected to another component with the proper circuitry, the ampli er standby
function can be turned
and the
R SPEAKER OUTPUT
for remotely switching the ampli er between Operational and Standby
and remotely.
ON OFF
and pull the securing block out far enough to
and
LEFT RIGHT CHANNELS
Figure 2: Rear Panel
. Secure the
MODEL
PAGE 11