Control Chassis Controls - JEFF ROWLAND CRITERION Operational Manual

CONTROL CHASSIS CONTROLS

1. INPUT BUTTONS 1-6. The main input number is selected by pressing the desired input
button.
2. RECORD PUSHBUTTON. Enters the
selected by pressing the front panel's
button. This can also be done by choosing
persists until a main input number is selected.
SELECT MODE
3. MENU PUSHBUTTON. Enters
the mode.
MENU
4. STANDBY PUSHBUTTON. Turns display off and mutes the preamplifier. Typically used to
extend the life of the display while maintaining the preamplifier circuitry in a powered status.
5. MUTE PUSHBUTTON. Pressing the
Pressing the
MUTE
a third time will return the volume to the original unmuted condition. Pressing and holding the
button for approximately 10 seconds forces a hardware reset.
MUTE
6. VOLUME/ENTER CONTROL KNOB. Rotation of the volume control knob clockwise will
increase the output level of the
clockwise will decrease the output level. The
range volume control system. Rotating the volume knob slowly will cause the volume to
increase or decrease in small, precise steps. Rotating the knob abruptly will result in large,
immediate changes to the output level. Depressing the volume control knob will enter and exit
the
CRITERION PREAMPLIFIER
In mode, rotating the volume knob will scroll through the
MENU
menu and submenus.
RECORD SELECT
RECORD
mode. Also used to select the
MENU
MUTE
button a second time will fully mute the volume. Pressing the
CRITERION PREAMPLIFIER
's mode, duplicating the function of the
MENU
Figure 2: Control Chassis Controls
mode. The record input number is
button and then pressing the desired input
from the
RECORD SELECT
button once will reduce the volume by 20 dB.
. Rotation of the knob counter-
CRITERION PREAMPLIFIER
CRITERION PREAMPLIFIER
. The
MENU RECORD
option and exit
MENU
button
MUTE
features a dual-
button.
MENU
's
13