JEFF ROWLAND CRITERION Operational Manual page 12

Table of Contents

Advertisement

5. CHANNEL BALANCE/OFFSET INDICATOR. The channel balance indicator is a horizontal
bar graph located to the right of the phase indicator. The cursor changes from a small square
to a diamond shape at the center of the bar graph when the left and right channels have
identical gains, or when no input gain offset has been added to a selected input. Whenever a
channel balance or gain offset is adjusted the cursor will change from a diamond to a square.
Each increment of the cursor is equal to one-half dB of gain offset of each channel, or a one
dB difference between right and left channels.
6. INPUT NUMBER INDICATOR
jacks. If inputs
1/2/B
selected,
will be indicated.
UNBAL
7. INPUT LABEL INDICATOR
selected will be indicated. A complete list of input names is provided in the
menu function is selected.
8. BATTERY CHARGE STATUS. An 8-segment "gas gauge" indicates the approximate battery
capacity when operating in battery mode. It is fully lit when the battery charge is between
87.5% and full. The outline appears empty when the battery's charge is depleted to less than
12.5%. When battery mode is selected, a
RUN ON AC/CHARGE
increment during battery recharging until the batteries are fully charged. At full charge the gas
gauge will be solid.
9. VOLUME/MUTE INDICATOR.
input numerically, from 00.0 to 99.5, in 0.5 dB increments. When the preamp is
muted the volume indicator numbers will be surrounded by corner brackets which
indicates that the selected volume will be decreased by 20 dB. The selected volume
numbers will also be decreased by 20. When the preamp is fully muted the original
volume indicator numbers will be surrounded by full brackets which indicates that the
selected volume will be decreased to zero.
.
Indicates which input number is routed to the
through
are selected
1
4
.
If the input is labeled via the
B
mode is selected from the
This display shows the current volume of the selected
will be indicated. If inputs
BAL
function, then the label
MENU
will appear to the left of the gas gauge. When
, the gas gauge will sequentially
MENU
MAIN OUTPUT
or
are
5
6
when the
MENU
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents