problems on associated electronic components, speakers, speaker wires, and interconnects,
particularly in complex audio systems consisting of multiple amplifiers and multiple source
components.
SETTING OUT 2 OFFSET
.
Enter
Scroll and select
MENU
amount of offset. Adjust the offset with the front panel's knob or the remote's
() NAVIGATION LEFT ()
SETTING INPUT OFFSET
.
Enter
Scroll and select
MENU
amount of input gain offset. Adjust the offset with the front panel's knob or the remote's
NAVIGATION RIGHT () NAVIGATION LEFT ()
ADJUSTING
OUT 2 OFFSET
.
Enter
Scroll and select
MENU
Adjust the offset with the front panel's knob or the remote's
amount of offset.
RIGHT () NAVIGATION LEFT ()
FACTORY RESTORE
.
Enter
Scroll and select
MENU
adjustments to the original factory-set default values: Main and record volume levels are set to
0dB, input device name assignments are cleared, input and output gain offset adjustments are
zeroed, and the
CRITERION PREAMPLIFIER
NOTE: PRESSING AND HOLDING THE MUTE BUTTON ON THE CRITERION PREAMPLIFIER'S
CONTROL CHASSIS FOR APPROXIMATELY 10 SECONDS, THEN RELEASING, WILL FORCE A
RESET OF THE PREAMPLIFIER'S HARDWARE AND RETURN MAIN AND RECORD VOLUME TO 0
. The balance indicator bar temporarily shows the
OUT 2 OFFSET
buttons. Exit by pressing any of the
. The balance indicator bar temporarily shows the
INPUT OFFSET
buttons. Exit by pressing any of the
.
The balance indicator bar temporarily shows the
OUT 2 OFFSET
buttons. Exit by pressing any of the
FACTORY DEFAULTS
is returned to AC operation.
buttons.
MENU
MENU
.
This action returns all configuration and
NAVIGATION RIGHT
buttons.
MENU
NAVIGATION
buttons.
d
B.
24