Elation TVL2000 User Instructions page 10

TVL2000
System Menu.
The TVL2000 comes with an easy to navigate system
menu. This next section will detail the functions of each command in
the system menu. Please read the next section thoroughly!
To access the main menu press the MENU button. Tap the UP or DOWN
buttons until you reach function you wish to change. When you reach
the function you wish to change press the ENTER button. When a
function is selected use the UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the MENU
button is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU button.
ADDR -
DMX Address Setting.
1. First set the unit to your desired DMX Channel mode.
2. To set your address, tap either the MENU, UP, or DOWN
buttons until "ADDR" is displayed, press ENTER. "1" will now be
displayed and flashing.
3. Press the UP or DOWN buttons to find your desired address.
When you have found your desired DMX address press ENTER,
and connect your DMX Controller.
CHND -
This will let you switch between the 3 DMX Chan-
nel Modes.
1. Press the MENU button until "CHND" is displayed, press
ENTER. Either "MOD 1" (2 Channel Mode), "MOD 2" (2 Channel
Mode), or "MOD 3" (3 Channel Mode) will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
MANU -
In this mode you can manually adjust the LED
©Elation Pr fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 10
o
System Menu TVL2000
intensity to create your desired color temperature.
1. Press the MENU button until "MANU" is displayed, press
ENTER. "LED1", "LED2" or "DINN" will be displayed. LED 1 is
warm white, LED 2 is cool white, and DIMM is the master
dimmer for this mode.
2. Use the UP or DOWN buttons to scroll to the color you
would like adjust first, and press ENTER.
3. Use the UP or DOWN buttons to adjust the intensity of the
chosen color, and press ENTER after the adjustment.
4. Continue to make adjustments to the two colors until your
desired color is reached. Once your desired color is reached do
not leave this mode.
5. To leave this mode, press the MENU button. Once you leave
this mode, all settings will be reset.
BLND -
1. Press the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout press the UP or DOWN buttons until Yes
is displayed, press ENTER to confim and exit. The fixture will
now be in Blackout mode. To deactivate Blackout mode, select
No and press Enter.
LED -
turn off after 20 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display On at all
times, or "OFF" so that the LED display turns off after 20 sec-
onds.
©Elation Pr
Blackout or Stand by mode.
With this function you can have the LED display
fessionals® - www.elationlighting.com - TVL2000 Instruction Manual Page 11
o
System Menu