Figure 4 Sharpener Positioning - Univex 1000M Signature Series Operator's Manual

1 LOCKING KNOB ASSEMBLY
2 HONING POSITION
3 SHARPENER OPERATION
SELECTION DIAL
4 SHARPENER NEUTRAL
POSITION
5 SHARPENING POSITION
8
FIGURE 3
POSITION THE SHARPENER
ASSEMBLY SO THAT THE LOCKING
KNOB ASSEMBLY IS BEHIND THE
FENCE.
SLIDE THE CARRIAGE FORWARD
UNTIL THE PLASTIC BEAD SLIPS
INTO THE NOTCH ON THE FENCE.
TIGHTEN THE KNOB TO SECURE
THE SHARPENER TO THE FENCE.
FIGURE 4