Installing The Car Seat On The Base - Peg-Perego PRIMO VIAGGIO SIP 30.30 Owner's Manual

Now that you have installed the base in
your vehicle, you are ready to install the
car seat on the base.
1• Holding the car seat by the handle,
press it rear facing on the base until
you hear the click. You will not be
able to move the car seat if it is
properly locked in place. Check to
make sure the base is still levelled.
If not, remove the car seat and
properly adjust the base.
Important! Newborns should be
properly reclined. If the seat reclines too
much, your baby can be ejected from
the seat in an accident. If too upright, it
can cause breathing problems.

Installing the Car Seat on the Base

23