Installing The Base - Peg-Perego PRIMO VIAGGIO SIP 30.30 Owner's Manual

When using Primo Viaggio Sip 30•30 with its base, first you install the base,
and then you install the car seat on the base.
Important! Read your vehicle manual for instructions on where to best install an
child car seat in your vehicle.
There are two ways to install the base:
I USING THE LUAS
SYSTEM. If your car
has "lower universal
anchorage systems
(LUAS)", you can install
the child car seat using the
LUAS system instructions on page
14. The anchor is a bar located where
the seat back meets the seat bottom
(slide your hand down between the
seat back and seat bottom to locate
this bar).
Important! Also read your vehicle
manual for locating lower anchors
and instructions on using the LUAS
system.

Installing the Base

II USING THE STANDARD LAP BELT/
SHOULDER STRAP. If your car does
not have universal lower anchors,
install the child car seat using the
instructions for lap/shoulder belt
straps on page 17.
13