Installing The Seat With Different Types Of Seat Belts - Peg-Perego PRIMO VIAGGIO SIP 30.30 Owner's Manual

Installing the Seat with Different Types of Seat Belts

Installation of Primo Viaggio Sip 30•30
without base follows the same rules as
with base regarding the availability of
different types of vehicle seat belts.
Important! For different types of seat
belts, please refer to page 19 and 20.
Should your vehicle belt need a
locking clip, please refer to page 21 for
installation details. Illustration in this
page shows the completed installation.
Primo Viaggio Sip 30•30 should not be
installed on seat types shown on page
22.
Rotate the handle towards the vehicle
seat until it clicks loudably in position.
To rotate the handlebar, press each of
the round buttons (located on each
side of the handle where it attaches to
the seat) and rotate it to the position
required. Any other position may injure
your baby in an accident.
Make sure the handle is locked on both
sides, trying to move it from its position.
27