Figure 2-5 Adjusting The Length Of The Left Rail At The Back Of The Cabinet - Sun Microsystems StorageTek 5220 NAS Appliance Getting Started Manual

4. At the back of the cabinet, adjust the length of the left rail as needed to fit the
cabinet, and position the rail flange over the face of the cabinet rail (
Adjusting the Length of the Left Rail at the Back of the Cabinet
FIGURE 2-5
5. Align the rail flange so that the mounting holes correspond to those at the front of
the cabinet.
Chapter 2 Installing the Appliance and Back-End Storage
).
FIGURE 2-5
21