LifeGear 97320 Owner's Manual page 10

STEP 1&2
Install Handrails
1. Connect the Sensor Cable I (#73) and Sensor Cable II (#74).
2. Fasten the R-Handrail (#35) to the Base Frame (#2)
with three M8*16 Bolts (#50) and M8 Spring Washers (#55).
Repeat this step to assemble L-Handrail (#34). Careful not
to crimp,pinch or otherwise damage the
cable and cable connections.
Install Handlebar
3. Attach the Handlebar (#36) to the top of the Handrails
(#34 & #35) with two Handlebar Adorners
(#42) and four M8*50 Bolts (#43).
4. Connect the Sensor Cable II (#74) and Sensor Cable III (#75).
Place the connection inside of R-Handrail (#35). Careful
not to crimp, pinch or otherwise damage the cable and cable
connections.
2-1
3-1
4-1
9
1
74
2
2
3
34
43
4
35
73
35
55 & 50
36
42
35
75
74