LifeGear 97320 Owner's Manual page 19

At the end of every exercise session always:
Remove the Safety Tether Key from the Computer Console.
Use the main power switch to turn the treadmill off. The main power switch is located at the
front of the treadmill next to the electrical cord.
Always position and store the electrical cord where it is clear from all pathways.
Unplug the electrical cord from the electrical outlet. This is especially important if you are not
going to use your treadmill for extended periods.
Wipe all treadmill surfaces with a dry cloth or towel-especially perspiration on the handlebars,
control panel, running belt or other treadmill components.
CAUTION: Turn off and unplug the treadmill before proceeding with any maintenance or
visual inspections. Failure to do so may result in serious injury.
Note: Failure to perform the required periodic and preventative maintenance can void your
warranty.
18