Resuming A Call - Aastra DT690 User Manual

C P
ORDLESS HONE FOR
11.8.1
11.9
61
MD E
VOLUTION
3. Enter the identification code for the call you wish to put on hold. The
code consists of 1 or 2 digits, depending on the configuration. For
more information, contact the system administrator.
Note: You will be prompted for the identification code later, when
you wish to resume the call that has been put on hold.
Press

Resuming a Call

To resume the call, do the following:
1. Press 10 to activate the call parking service.
2. Enter the identification code for the call that has been put on hold.
3. Press
Note: An external call that is put on hold, is connected to on-hold
music.
Conference
The conference function allows up to 4 conference participants. Only the
conference leader (that is, the person initiating the conference) can
admit participants.
During the conference, a special tone will be heard every 15 seconds as
a reminder of the ongoing conference. Each time a participant enters or
leaves the conference, a burst tone is heard.
When the conference leader leaves the conference, the conference will
continue with the other included parties. When only two participants are
left, the conversation is changed back to a normal two party connection.
Note: This feature needs to be configured in the WinPDM or CPDM by
the system administrator.
When you have an ongoing conversation and want to establish a phone
conference, do the following:
1. Press More, select New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press
When the third party has answered, continue with the following to
establish a conference:
3. Press More, select Conference and press Select.
to finish the procedure.
to return to the call.
.
1424-EN/LZT 103 090 Uen D 2010-02-12