Installation - Datalogic QuickScan QS6500BT Quick Reference Manual

Installation

The QuickScan
use. The following figures show the steps to perform an installa-
tion. Turn off the host computer before connection. Consult the
host terminal's manual if necessary.
6
1. Lift the cable retainer.
2. Connect the interface (I/F) cable to the Base Station.
NOTE
3. Connect the power cord to the Base Station.
4. Latch the cable retainer to secure the cables.
5. Route both cables through the notch.
6. Connect the I/F cable to the terminal's communication port.
7. Connect the AC adapter to the wall outlet.
Quick Reference Guide
QS6500BT linear imager is easy to install and
TM
8
For Power Off Terminal application with standard USB inter-
face, attach to USB 1.0, 1.1 or 2.0 host device ONLY.
2
Base
3
Station
Power
Cable
Routing
9
7
1
I/F
4
5
1