Led And Beeper Indications - Datalogic QuickScan QS6500BT Quick Reference Manual

Power Supply
Models require either a Listed class II or class III with a Limited
Power Source (LPS). For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN 60335-
series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC Output: 9 - 12 VDC
Max. Current: 2.5 A
NOTE

LED and Beeper Indications

Some LED and Beeper indications are user-configurable. Those
listed in the following table are standard default settings. See the
Product Reference Guide (PRG) for programming information.
Condition
Powering On
Ready to Operate
Good Read
Error Indication
Quick Reference Guide
Max. Power: 30 W
For USB Power Off Terminal applications, attach to USB 1.0,
1.1 or 2.0 host device ONLY.
LED
Bright Green Flash
Configurable as OFF
or ON DIM
Bright Green Flash
Red Flash
Beeper
One Beep
None
One Beep
None
5