Statement Of Compliance - Datalogic QuickScan QS6500BT Quick Reference Manual

6. Verify that the Base Station power cable is securely attached
and the external power adapter is plugged in.
If the linear imager still does not function properly, contact your
local supplier or Datalogic Customer Support Services.

Statement of Compliance

This device complies with Part 15 of the FCC rules. Operation is
subject to the following conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including
interference that may cause undesired operation.
FCC Class B Compliance Statement
This Equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with these instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
8
TM
QuickScan QS6500BT