Table of Contents
Advertisement
Chapter 4 Adjustments and settings for recording
4-8-3
Selecting
LEVEL control function
This function enables the recording level to be adjusted using
the F.AUDIO LEVEL control.
To select this function, perform menu operations to open the
<MIC/AUDIO> screen from the VTR MENU page, and set
whether to enable or disable the F.AUDIO LEVEL controls for
the system selected as the input signals using the FRONT VR
CH1 and FRONT VR CH2 items.
#
Setting items and what is set
Variable
Item
range
FRONT VR CH1
FRONT
For selecting whether or not to enable the
W.L
F.AUDIO LEVEL control for the input signals
REAR
which have been selected for audio CH1.
ALL
FRONT: The control works only when
OFF
W.L.:
REAR:
ALL:
OFF:
FRONT VR CH2
FRONT
For selecting whether or not to enable the
W.L
F.AUDIO LEVEL control for the input signals
REAR
which have been selected for audio CH2
ALL
FRONT: The control works only when
OFF
W.L.:
REAR:
ALL:
OFF:
46
the
F.AUDIO
Remarks
FRONT has been selected.
The control works only when
WIRELESS has been selected.
The control works only when REAR
has been selected.
The control works regardless of
which input has been selected.
The
control
does
not
work
regardless of which input has been
selected. Even if it is rotated, the
recording level will not change.
FRONT has been selected.
The control works only when
WIRELESS has been selected.
The control works only when REAR
has been selected.
The control works regardless of
which input has been selected.
The
control
does
not
work
regardless of which input has been
selected. Even if it is rotated, the
recording level will not change.
4-8-4
Allocating functions to the
USER MAIN, USER1 and
USER2 buttons
The desired functions can be allocated to the USER MAIN,
USER1 and USER2 buttons.
To select this function, perform menu operations to open the
<USER SW> screen from the OPERATION page, and set the
desired function each with the USER MAIN SW item, USER1
SW item and USER2 SW item.
#
Functions which can be selected
INH:
No functions are allocated.
S.GAIN:
The S.GAIN function is allocated.
DS.GAIN: The DS.GAIN function is allocated.
S.IRIS:
The SUPER IRIS function is allocated. This is
useful when providing backlight compensation.
I.OVR:
The IRIS override function is allocated.
This changes the target (reference) value in the
auto iris mode.
To change the target value, first establish this
mode, and then press the JOG dial button to
enable the target value to be changed. The target
value is changed by turning the JOG dial button
clockwise
or
"+ +," "–" or "– –" is displayed on the left of the iris
display area on the viewfinder screen.
turning the JOG dial button at the position to be
changed, and press the JOG dial button to enter
the change in the target value.
The reference value is restored when this mode is
released or the power is turned off.
+:
The aperture is opened by a half stop.
+ +:
The aperture is opened by a full stop.
–:
The aperture is stopped down by a half
stop.
– –:
The aperture is stopped down by a full
stop.
No display: The
unchanged.
S.BLK:
The SUPER BLACK function is allocated. This
function reduces the black level to below the
pedestal level.
B.STR:
The BLACK stretch function is allocated. This
function highlights the black gradations.
counterclockwise.
Stop
reference
value
remains
"+,"
Hide quick links:
Advertisement
Table of Contents
