External Speaker (Option); Kes-3; Kes-5 Or Kes-6 - Kenwood NX-700 Service Manual

5. External Speaker (Option)

5-1. KES-3

The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
■ Connection Procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
Fig. 5-1

5-2. KES-5 or KES-6

External speaker KES-5 or KES-6 can be installed for
KAP-2. If KES-5 or KES-6 is installed, it can be set by chang-
ing the CN1 short pin from pins 4 and 5 to pins 5 and 6 on
the KAP-2.
KAP-2 CN1 Connect
4-5
5-6
When you use the KES-5 or KES-6, plug the short pin to
pins 5 and 6 on the KAP-2.
When you use the INT. SP or KES-3, plug the short pin to
pins 4 and 5 on the KAP-2.
KAP-2 unit
1 CN1
INT. SP
or
KES-3
Fig. 5-2
INSTALLATION
Set Up
INT. SP or KES-3
KES-5 or KES-6
6
KES-5
or
KES-6
Short pin
NX-700/700H
■ Connection Procedure
Insert the crimp terminal into the Square plug supplied
with the KAP-2.
Black/White
4
lead
Square plug
5
(E59-0419-05)
Black lead
Insulating cover
(F29-0481-15)
Fig. 5-3
■ KAP-2 Cable (E37-1113-15) 6-pin Connector
Pin No.
1 2 3
1
4 5 6
2
3
4
5
6
Color Name
Red HR2
Blue GND
Yellow OSP
Green ESP
Brown GND
Black HR1
11