Adjustment; Controls; Panel Test Mode; Lcd Display In Panel Test Mode - Kenwood NX-700 Service Manual

NX-700/700H

Controls

Power switch
Volume Up/Down key
Modular
Programmable function keys
MIC jack
KMC-36
[PTT]

Panel Test Mode

■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■ Key operation
"FNC" not appears on the sub LCD display
Key
Function
[ ] / [ ] Test CH up/down
[ ] / [ ] Volume up/down
Push: Squelch level up
[ ]
Hold: Squelch off
[ ] Wide/Narrow/Very narrow
[ ] Shift to panel tuning mode -
[ ] Function on
[ ] MSK 1200bps and 2400bps 2400bps:
[ ] Test signaling CH up
44

ADJUSTMENT

Channel Up/Down key
Keypad
[HOOK]
Display
Channel No.
-
Squelch level
Squelch off: icon appears
Wide: "w"
Narrow: "n"
Very narrow: "v"
"FNC" appears on the sub
LCD display
icon appears
Signaling No.
"FNC" not appears on the sub LCD display
Key
Function
Microphone key
[PTT] Transmit
Use as the DTMF keypad.
[0] to [9]
If a key is pressed during
and [A]
transmission, the DTMF
to [D],
corresponding to the key
[#], [ ]
that was presses is sent.
"FNC" appears on the sub LCD display
Key
Function
[ ] -
[ ] Analog/NXDN
[ ] / [ ] Function off
[ ] -
[ ] LCD all lights
[ ] High power/Low power
[ ] Function off
[ ] Compander on/off
[ ] Beat shift on/off
Microphone key
[PTT] Transmit
[0] to [9]
and [A]
Function off
to [D],
[#], [ ]
• LED indicator
Red LED Lights during transmission.
Green LED Lights when there is carrier.
• Sub LCD indicator
"FNC" Appears at function on.

• LCD display in panel test mode

Temperature
Sub LCD display +25
An SQ5
Main LCD display
Squelch level
(Analog mode only)
An : Analog narrow mode
Aw : Analog wide mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
Display
-
-
Display
Analog: "A"
NXDN: "N"
-
-
LCD all point appears
Low: icon appears
-
On: icon appears
On: icon appears
-
1- 1
Signaling No.
Channel No.