Miele PG 8080 U Operating Instructions Manual page 54

Frequently asked questions
Problem
The detergent dispenser
cover will not close.
The inside of the door
and/or the interior walls
are wet after a program
has finished.
There is water in the
wash cabinet at the end
of a program.
Some programs run for
a long time.
Although AutoOpen is
selected, the door
remains closed at the
end of the ProSpeed
program and the
dishware is still moist.
54
Possible fault
Detergent residue is
blocking the latch.
This is normal!
The filter combination in
the wash cabinet is
clogged.
The drain pump or
non-return valve is
blocked.
There is a kink in the drain
hose.
No fault!
Certain programs have a
long runtime.
No fault!
Because of the
program's short runtime,
the AutoOpen function is
not available for the
ProSpeed program.
Solution
Remove the detergent
residue.
None.
The moisture evaporates
after some time.
Before fixing the fault:
– Press the - button to
turn the commercial
dishwasher off.
Clean the filter
combination (see
Cleaning and care).
Clean the drain pump or
the non-return valve (see
Maintenance).
Remove the kink.
Select a different program
(see Program guide).
To improve the drying,
raise the rinse
temperature (see Setting
menu - High temp rinse).