Yamaha PZ50W Service Manual page 411

PZ50VT/PZ50MP
1 Corrugated tube (engine stop
switch lead, throttle switch lead,
right grip warmer lead, and
thumb warmer lead)
2 Right grip warmer lead
3 Right handlebar switch
4 Route the throttle cable over the
handlebar.
5 Multi-function meter unit lead
6 Parking brake cable
7 Route the brake hose in front of
the handlebar.
8 Route the left handlebar switch
leads behind the handlebar.
9 Brake master cylinder
0 Left grip warmer
A Brake light switch
B Corrugated tube (left grip warmer
lead, grip/thumb warmer adjust-
ment switch lead, brake light
switch lead, and headlight beam
switch lead)
C Auxiliary DC jack
D Rectifier/regulator
E Cylinder identification sensor
coupler
F A.C. magneto coupler
G Speed sensor lead
H Pressure regulator hose
I Fuel tank breather hose
J Throttle position sensor
K Throttle body heater hose
L Fasten the A.C. magneto lead,
oil pressure switch lead, and
pressure regulator hose with the
holder.
M Knock sensor
N Fasten the A.C. magneto lead,
water pump outlet hose, and
knock sensor lead with the plas-
tic band.
O Route the A.C. magneto lead
behind the idling adjusting screw
remote adjustment cable.
CABLE ROUTING
9-58
SPEC