Yamaha PZ50W Service Manual page 40

ENGINE OIL REPLACEMENT
• Apply a thin coat of engine oil onto the O-ring 4
of the new oil filter cartridge.
4
CAUTION:
Make sure that the O-ring 4 is positioned cor-
rectly in the groove of the oil filter cartridge.
• Tighten the new oil filter cartridge to specifica-
tion with an oil filter wrench.
• Tighten the oil cooler bolts to specification.
13. Install:
• Drain bolts
(along with the new gaskets)
14. Fill:
• Engine oil
(with the specified amount of the recom-
mended engine oil)
Add 1.5 L (1.3 Imp qt, 1.6 US qt) of the recom-
mended engine oil to the oil tank, and then
install and tighten the oil level gauge/dipstick
and the cylinder head cap.
15. Inspect:
• Engine and oil tank
(for engine oil leaks)
16. Inspect:
• Engine oil level
Refer to "ENGINE OIL LEVEL INSPECTION".
2-22
INSP
ADJ
Oil filter cartridge:
17 Nm (1.7 m · kg, 12 ft · lb)
Oil cooler bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
®
LOCTITE
Oil tank engine oil drain bolt:
16 Nm (1.6 m · kg, 11 ft · lb)
Oil pan engine oil drain bolt:
30 Nm (3.0 m · kg, 22 ft · lb)
Quantity:
Total amount:
3.00 L (2.64 Imp qt, 3.17 US qt)
Periodic oil change:
2.45 L (2.16 Imp qt, 2.59 US qt)
With oil filter replacement:
2.63 L (2.31 Imp qt, 2.78 US qt)