Yamaha PZ50W Service Manual page 397

L Cylinder identification sensor
M Ignition coil
N Fasten the sub-wire harness to
the frame front cross member
with the plastic band. (PZ50VT/
PZ50MP)
O Fasten the fuel tank breather
hose, auxiliary DC jack lead, and
speed sensor with the plastic
band. (PZ50VT/PZ50MP)
P To the left handlebar switch
Q Frame rear cross member
R To the speed sensor
S Align the paint mark on the fuel
tank breather hose with the top
of the grommet.
CABLE ROUTING
9-44
SPEC