Installing/Removing The System Unit - Fujitsu Primergy BX900 S2 Operating Manual

5.2.2

Installing/removing the system unit

V
CAUTION!
Because the PRIMERGY BX900 S2 system unit is large and
●
heavy, at least three people are needed to safely mount it in the
rack or remove it from the rack.
Please observe the safety information and notes on rack installation
●
in the chapter "Important
Before you install the system unit in the rack, remove all
●
server blades, storage blades, connection blades, management
blades, all power supply units, fan modules and dummy modules to
reduce the weight of the system unit.
Only lift or carry the system unit by the handles on the long sides.
●
Never lift or carry the system unit by the handles on the front or back.
●
Ê Make a note of the positions of the individual server blades and storage
blades, the connection blades, power supply units and fan modules in the
system unit for reinstallation.
Ê Remove the server blades, storage blades, power supply units, fan
modules, connection blades, management blades and dummy modules
from the system unit. Removal of these components is described in the
"PRIMERGY BX900 S2 System Unit Upgrade and Maintenance Manual".
I
If there is no PRIMERGY BX900 S2 System Unit Upgrade and
Maintenance Manual available on ServerView Suite DVD2, please
refer to the following URL:
http://manuals.ts.fujitsu.com
http://jp.fujitsu.com/platform/server/primergy/manual/
market)
BX900S2
information".
(for EMEA market)
Operating Manual
Hardware installation
(for Japanese
57