Step 5: Test the Mobile Client Console Connection
Once you have accessed the R3000 Administrator console, you should verify that the
Mobile Client can be accessed by the R3000.
A. Use a workstation on which the Mobile Client is installed that is not on a filtered por-
tion of the LAN. Open a browser window on a network workstation, and then go to
http://test.8e6.net (an empty site for testing pornography filtering).
B. The connection should be blocked, and the block page served by the R3000 Mobile
appliance should display in the browser's Address field. If you do not receive a block
page, contact an 8e6 Technologies solutions engineer or technical support represen-
tative.
NOTES: Refer to the 8e6 Mobile Client User Guide for information on installing
the Mobile Client. Port 22 (SSH) must be open on your network to allow access by
remote technical support.
8
6 M
C
Q
S
e
obile
lient
uiCk
tart
G
uide