Remote Control Operating Instructions; On/Off; Timer On; Timer Off - Kelvinator Reverse Cycle User Manual

(23 ft)

TIMER ON :

Press the "TIMER ON" button to activate the auto start timer function. Auto start
can be set from 1/2-24 hours. At unit off, press "TIMER ON" button,"HOUR ON"
on the display will blink and during 5 seconds blinking, the value can be adjusted by
pressing + or - button, every press of this button, 1/2 hour will be increased or
decreased, but continuously press the + or - button, 2 seconds later, the value
will be changed quickly, 1/2 hour will be increased in every 1/4 second automatically
by the remote controller. During blinking, press the "TIMER ON" button to confirm
the time. After "TIMER ON" set up, when repressing the "TIMER ON" button, the
"TIMER ON" setting will be canceled.

TIMER OFF:

Press the "TIMER OFF" button to activate the auto stop timer function. The method
of setting is the same as above for TIMER ON.