Introduction For Special Function; Energy Saver; Light; About Lock - Kelvinator Reverse Cycle User Manual

ENERGY SAVER:

Press "ENERGY SAVER" to activate or disactivate the ENERGY SAVER Function.
In this mode, the fan will continue to run for 1 minute after compressor shuts off.

LIGHT:

Press this button at unit On, the light on the main unit will be turned on or off. Light On is
defaulted when power on.
CLOCK
Press this button, the clock can be set up, icon
can be adjusted by pressing + or - button, if continuously press this button for 2 seconds
above, in every 1/2 seconds, one minute will be increased, if you are still pressing the button
after ten minutes increased, ten minutes will be increased every 1/2 seconds. Druing
blinking, repress the Clock button, icon
setting succeeded.

INTRODUCTION FOR SPECIAL FUNCTION

ABOUT LOCK

Press +and - buttons simultaneously to lock or unlock the keypad. If the remote controller
is locked, the icon
flicker for three times. Repress the combination to unlock.
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch
will be constantly displayed and it denotes the
will be displayed on it, in that case, press any button, the mark will
blinks. Within 5 seconds, the value
and