Dubbing Images Recorded On A Tape To A Memory Card - JVC GR-DV2000 Instructions Manual

60
EN
Power Switch
SNAPSHOT
Button
COPY – OF F
ON
Play/Pause Button (4/6)
MENU Wheel
Lock Button
Display
SP 4 6
Dubbing Images Recorded On A Tape To A
Memory Card
Images can be dubbed from a tape to a memory card .
1
Load a memory card (
( pg. 10).
2
Set the Power Switch to "
the Lock Button. Open the LCD monitor fully or pull
out the viewfinder fully.
3
Press the MENU wheel. The Menu Screen appears.
Rotate it to select "
VIDEO Menu appears.
4
Rotate the MENU wheel to select "
and press it. The Sub Menu appears. Rotate it to
select "ON" and press it. Selection is complete.
5
Rotate the MENU wheel to select "1RETURN" and
press it twice. The normal playback screen resumes.
6
To select a video image to be dubbed, start playback
by pressing 4/6. At the moment you find the image
you wish to dub, press it again to engage Still
Playback.
7
To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•" " blinks during dubbing.
NOTES:
If SNAPSHOT is pressed in step 7 when a memory card
is not loaded, the message "COPYING FAILED" is
displayed.
If an image recorded on the tape using the WIDE mode
( pg. 28) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote
control (provided) (
Images are dubbed in VGA file size.
DUBBING
pg. 11) and cassette
" while pressing down
VIDEO" and press it. The
pg. 64).
(cont.)
COPY"