Additional Features For D.s.c; Dubbing Still Images Recorded On A Tape To A Memory Card; Resetting The File Name; Protecting Files - JVC GR-X5AC Instructions Manual

ADDITIONAL FEATURES FOR D.S.C.

28
EN
Dubbing Still Images Recorded on a
Tape to a Memory Card
Still images can be dubbed from a tape to a
memory card.
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY switch to "VIDEO".
4
Set the power switch to "PLAY" while
pressing down the lock button located on the
switch.
5
Set " COPY" to "ON".
( pg. 33, 38)
6
Press 4/9 to start playback.
7
At the point you want to dub, press 4/9
again to engage Still Playback.
8
To dub the image, press SNAPSHOT.
● The "
" indication appears during dubbing.
NOTES:
● To use playback special effects with a video image
you wish to dub, perform up to step 8 using the
remote control. (
● Images are dubbed in 640 x 480 pixels.

Resetting The File Name

By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1
Perform steps 1 – 3 in "Normal Playback of
Images" ( pg. 26).
2
Press MENU. The menu screen appears.
3
Press Up (4/9) or Down (8) to select "NO.
RESET", and press SET. The NO. RESET
screen appears.
4
Press Up (4/9) or Down (8) to select
"EXECUTE", and press SET. The new folder
(such as "101JVCGR") will be made and the file
name of the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as "101JVCGR") will be made and the file
name will start again from DVC00001.
pg. 16)
pg. 17)
pg. 24)

Protecting Files

The protect mode helps prevent the accidental
erasure of files.
1
Perform steps 1 – 3 in "Normal Playback of
Images" ( pg. 26).
2
Press MENU. The menu screen appears.
3
Press Up (4/9) or Down (8) to select
"PROTECT", and press SET. The sub menu
appears.
To protect the currently displayed file
4
Press Up (4/9) or
Down (8) to select
"CURRENT", and press
SET. The PROTECT
screen appears.
5
Press 3 or 5 to
select the desired file.
6
Press Up (4/9) or
Down (8) to select
"EXECUTE", and press
SET.
● To cancel protection,
select "RETURN".
● Repeat steps 5 and 6 for
all files you want to protect.
To protect all files stored in the memory card
4
Press Up (4/9) or Down (8) to select
"PROT.ALL", and press SET. The PROTECT
screen appears.
5
Press Up (4/9) or Down (8) to select
"EXECUTE", and press SET.
● To cancel protection, select "RETURN".
NOTES:
● If the "
" mark appears, the currently displayed
file is protected.
● When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
MENU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN