JVC GR-DV2000 Instructions Manual page 14

14
EN
Power Switch
Power Lamp
Lock Button
MENU Wheel
Display
QUAL I TY – F I NE
S I ZE – X
UXGA – AUTO
RETUR N
Menu Screen
GA
GETTING STARTED
Picture Mode Setting
The Picture mode can be selected to best match your
needs.
1
Set the Power Switch to "
the Lock Button located on the switch, and open the
LCD monitor fully or pull out the viewfinder fully.
The power lamp lights and the camcorder turns on.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select "
press it. The DSC Menu appears.
4
Rotate the MENU wheel to select "QUALITY" and
press it. The Sub Menu appears. Rotate the MENU
wheel to select the desired mode and press it.
If you are recording with the Shooting Mode Switch
( pg. 12) set to "XGA/VGA" . . . go to step 5.
If you are recording with the Shooting Mode Switch
set to "UXGA" . . . go to step 6.
5
Rotate the MENU wheel to select "SIZE" and press it.
The Sub Menu appears. Rotate the MENU wheel to
select "XGA" or "VGA".
Go to step 7.
6
Rotate the MENU wheel to select "UXGA" and press
it. The Sub Menu appears. Rotate the MENU wheel to
select the desired mode.
AUTO : or
button is pressed (
Automatically processes the image
according to the DOUBLE or ENLARGE
methods described below, depending on
the shooting situation or subject.
DOUBLE : appears (
Engages pixel-shift technology to double-
expose the image and generate a UXGA-
sized picture.
ENLARGE :
Digitally enlarges the image to UXGA
size.
7
Rotate the MENU wheel to select " RETURN", and
press it twice. The Menu Screen closes.
" while pressing down
appears when the SNAPSHOT
pg. 19).
pg. 19).
appears ( pg. 19).
(cont.)
DSC" and